• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 130oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Dual Black Poly Cotton Spiders with Mirror Image Layout

At TORO TECH being Fierce is in our DNA, it starts with a Fierce desire to Excel. The Fierce series of Low-Frequency Subs is the result of selecting the right components to create a series of Subs that are value priced but competition-ready. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE62 has Dual 1.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets, and 100% Pure Copper Wire directly hard-wired into the subwoofer leads. 

Fierce series Low-Frequency Subs offer a combination of features typically found in higher-end products while maintaining an attractive price point. These subwoofers are positioned as competitive options for those looking to enhance their car audio or home theater systems with quality bass performance.

• Heavy-Duty Textured Cast Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 1.5" / 38.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 70oz High Energy Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Dual Black Poly Cotton Spiders with Mirror Image Layout
  

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2" / 50.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 90oz High Energy Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Dual Black Poly Cotton Spiders with Mirror Image Layout

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR3 Toro Audio Micro Sized Mono Block Amplifier is rated at 800 Watts RMS and 2000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The MR3 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller.

With a tiny footprint of only 6.46" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• High Efficiency Class-D Design for Subwoofers 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1-OHM Stable Operation with Extensive Output Power Increase 
• Variable Gain Control

Looking to get noticed, you need look no further. Just one glance and you know these TORO Amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. 

The MRx2 Toro Audio Micro Sized Mono Block Amplifier is designed to operate in Mono for powering a Subwoofer system or Stereo for powering Mid Range or High Frequency drivers. is rated at 150 Watts x 2 @ 4 Ohms RMS and 250 Watts RMS x 2 @ 2 Ohm. This high quality Class-D Digital PCB layout includes a built-in auto sensing turn on function for vehicles that do not have the ability for RCA output.

The MRx2 utilizes High Pass, Low Pass and Full Range switching. Additionally a X1 and X10 switch that works in conjunction with the crossover allows for fine tuned frequency adjustments by increasing LPF or HPF frequencies by the power of 10. 

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• Sound Quality Full Range Class-D Design 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• X1 and X10 Switching for HPF / LPF Crossover 
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control

The PM6 Pro Audio Component Speakers are the result of years of experience in the 12 Volt Pro Audio scene from both sides of the pond. The Toro Tech PM6 Mid-Range speakers are 8 ohm which are best for multiple speaker setups ensuring that your final impedance will match up better to your amplifier. With 1.5" Voice coils and 140 Watts RMS these speakers will blast crisp clear sound quality with a rich wide range of tones you that wont find on standard mid-range speakers.

• Sold As Each
• Heavy Gauge Steel Basket with Thick Powder Coating
  
• Shallow mounting depth fit for all vehicle systems
  
• Fiber paper cone with foam surround
• High quality cloth spider with polyester fiber
• 1.5" High temperature KSV voice coil
• Fully isolated tinsel leads to eliminate crosstalk
• High Energy Y30 Ferrite Magnet
  
  

The PM69X Pro Audio Coaxial Speakers are the result of years of experience in the 12 Volt Pro Audio scene from both sides of the pond. The Toro Tech PM69X Mid-Range coaxial speakers already have wide-range dispersed tweeters built-in which simplifies installation and eliminates the need for crossovers or bullet tweeters. With 1.5" Voice coils and 140 Watts RMS these speakers will blast crisp clear sound quality with a rich wide range of tones you that wont find on standard mid-range speakers.

• Sold As Each
• Heavy Gauge Steel Basket with Thick Powder Coating
• Laminated paper cone with cloth surround
  
• High quality cloth spider with polyester fiber
• 1.5" High temperature TILL voice coil
• Fully isolated tinsel leads to eliminate crosstalk
• 25 Aluminum Bullet Tweeter
• High Energy Y30 Ferrite Magnet

The PM6K Pro Audio Component Kit Ultra Shallow Speakers are the result of years of experience in the 12 Volt Pro Audio scene from both sides of the pond. The Toro Tech PM6K is a full Mid-Range Speaker System with hand picked High Grade12db Crossovers and Super Tweeters that take the guesswork out of designing a professional audio system! With 1.5" Voice coils and 140 Watts RMS these speakers will blast crisp clear sound quality with a rich wide range of tones you that wont find on standard mid-range speakers.

• Comes With: PAIR of 6.5" & PAIR of 4" TWEETERS & PAIR of CROSSOVERS 
• Custom Cast Aluminum Baskets with Thick Powder Coating
  
• Custom Competition Grade 12 dB Crossovers 
• Two piece custom paintable metal grills
• Ultra shallow mounting depth fit for all vehicle system
• Laminated paper cones with cloth surrounds
• High quality cloth spider with polyester fiber
• 1.5" High temperature TILL voice coils
• Fully isolated tinsel leads to eliminate crosstalk
• 4" Aluminum Super Tweeters with Ferro Fluid Cooled 25mm V.C.
• High Grade Ferrite Magnets

The PM6X Pro Audio Coaxial Speakers are the result of years of experience in the 12 Volt Pro Audio scene from both sides of the pond. The Toro Tech PM6X Mid-Range coaxial speakers already have wide-range dispersed tweeters built-in which simplifies installation and eliminates the need for crossovers or bullet tweeters. With 1.5" Voice coils and 120 Watts RMS these speakers will blast crisp clear sound quality with a rich wide range of tones you that wont find on standard mid-range speakers.

• Sold As Each
• Custom Cast Aluminum Basket with Thick Powder Coating
• Laminated paper cone with cloth surround
  
• High quality cloth spider with polyester fiber
• 1.5" High temperature TILL voice coil
• Fully isolated tinsel leads to eliminate crosstalk
• 25 Aluminum Bullet Tweeter
• High Energy Y30 Ferrite Magnet
  
  

The PN6X Pro Audio Water Repellent Coaxial Speakers are the result of years of experience in the 12 Volt Pro Audio scene from both sides of the pond. The Toro Tech PNX6 Mid-Range speakers are 4 ohm which are best for multiple speaker setups ensuring that your final impedance will match up better to your amplifier. With large 2" Voice coils and 160 Watts RMS these speakers will blast crisp clear sound quality with a rich wide range of tones you won't find on standard mid-range speakers. Their neodymium magnets create a lower profile and weight while providing superior power handling. 

• Sold As Each
• Heavy Gauge Cast Aluminum Basket
  
• Wide Frequency range
• Shallow mounting depth 
  
• Fiber paper cone with foam surround
• High quality cloth spider with polyester fiber
• 2" High temperature KSV voice coil
• Fully isolated tinsel leads to eliminate crosstalk
• N38H Hi-Temperature Neodymium Magnet
  
  

The PT1 Pro Audio Super Tweeters are high powered Aluminum 4 Inch Compression Drivers with 25.5mm Voice Coils that can hold bursts of music up to 60 Watts RMS Each @ 100dB! These Super Aluminum flush mount High Frequency Transducers come with a 3.3uF capacitors to keep it from damaged from low frequencies. The PT1 is the perfect speaker that will add crisp clear highs to compliment your quality system.

• Sold As PAIR
• 3.3 uF High Quality Filter Capacitors 
  
• Metal grills for added protection 
• 4" Aluminum Super Tweeter
• Ferro Fluid Cooled 25mm V.C.
  
• 100dB Sensitivity
• Flush Mount
• High Energy Y35 Ferrite Magnet

The PT4 Pro Audio Super Tweeter is a high-powered Aluminum 2.25 Inch / 57mm High Powered Compression Driver with a 25.5mm Voice Coil that can hold bursts of music up to 30 Watts RMS/AES Each @ 100dB! While other manufacturers list peak power as RMS which can damage your system, we rate RMS using AES* standards. 

These Super Aluminum flush mount High-Frequency Transducers come with a 6dB Hi-Pass Filter Capacitor to prevent damage from low frequencies. The PT4 is a solid choice for add crisp clear highs to complement your mids and lows in any quality build and is designed for installations on Motorocyucle Faring Gauge Holes.

*The AES continuous power rating describes the average amount of power a speaker can handle over a long period (typical tests last two hours or more). Nominal (Continuous and Peak) SPL is calculated from measured SPL per cabinet (pink noise, crest factor 4) at 1 metre and referred to summed output at 10 metres.

• Sold As EACH
• 30w RMS / 60w Max / 120w PEAK
• 2.2UF / 250V High-Quality Filter Capacitor
  
• 1" Throat Size
• Threaded Mounting Design 
• Custom CNC Die Cast Aluminum Frame
  
• High Temperature 4 Ohm Voice Coils
• 100dB Sensitivity
  
• Titanium Diaphragm
• Designed for Motorocyucle Faring Gauge Holes
• High-Density Neodymium Magnets

Looking to get noticed, you need look no further. Just one glance and you know these TORO Rage amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point

As we’ve all learned, “A system is only as good as it’s weakest link,” 
 

In a competition system this becomes more critical. TORO Tech presents the ultimate low frequency solution for both competitors and audiophiles alike. Our Rage series Mono Block Amplifiers feature a MOSFET power supply to insure an inexhaustible stream of voltage under all conditions. These Mono Block Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. With competitors in mind we have designed the R3 to remain stable with as little as 1 Ohm loads.

The R3 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as Nickle plated terminal blocks for power input & speaker output. 

Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R3 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R3 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• 4 AWG Power and Ground Terminals
• Remote Level Control Port (for optional controller)

• Sound Quality Full Range Class-D Design
• Differential Input Switch to Eliminate Noise 
• Clip LED to Indicate Signal Clipping  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass, High Pass, Full Range Electronic Crossover
• 45Hz Fixed Bass Boost From 0 ~ 12dB
• Differential input switching to prevent ground noise. 
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 50Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

The RX2 Toro Audio Multi Channel Amplifier is rated at 65 Watts x 2 @ 4 Ohms RMS. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The RX2 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control.

With a frequency range from 12Hz ~ 40kHz this versatile amp can power a wide range of subwoofers and speakers. 

• Sound Quality Class-A/B Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass & High Pass Electronic Crossover
• Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control

The RX4 Toro Audio Multi Channel Amplifier is rated at 65 Watts x 4 @ 4 Ohms RMS and 180 Watts x 2 RMS @ 4 ohm bridged. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The RX4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control.

With a frequency range from 14Hz ~ 50kHz this versatile amp can power a wide range of subwoofers and speakers. 

• Sound Quality Class-A/B Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass & High Pass Electronic Crossover
• Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control