Looking to get noticed, you need look no further. Just one glance and you know these TORO Amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. 

The MRx4 is equally comfortable as a 2, 3 or 4 Channel solution for enabling future system expansion or re-configuration. All Full Range Amplifiers feature variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with gold plated RCA jacks for as well as an oversize gold plated terminal block for power input & speaker output. What does all this translate to? Simply, Amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

The MRx4 Toro Audio Micro Sized Mono Block Amplifier is rated at 80 Watts x 4 @ 4 Ohms RMS and 130 Watts RMS x 4 @ 2 Ohm. This high quality Class-D Digital PCB layout includes a built-in auto sensing turn on function for vehicles that do not have the ability for RCA output.

The MRx4 utilizes a 2/4 channel switch that allows all 4 channels to function with only 2 RCA inputs. This would benefit the user to utilize all 4 channels regardless of the source unit like a phone or standard head unit.

The High Pass and Low Pass Filter knob has a frequency setting from 20Hz ~ 300Hz based on your speakers and system setup requirements. 

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• Sound Quality Full Range Class-D Design 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• 2/4 Channel Switch for Left and Right Phone Source Units
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control

Remote Gain Knob for all Toro Tech Audio Rage Mono and Rage Micro Mono Block Amplifiers. This remote will allow you to lower the signal of the amplifiers gain. This is useful when lowing the subwoofer volume quickly is needed. 

• 17 Foot Cable 
• Gain knob to control bass 
• Mounting brackets

At TORO TECH, having a Fierce desire to exceed current benchmarks and excel in all areas is second nature. The Fierce series of Component Kits and Coaxial Systems is living and breathing proof of that desire. And to be honest with you, we do it quite effortlessly.

TORO Fierce Series 6 Inch Car Component Speakers are the result of decades of audio engineering and music listening plus the experience of countless sound competitions. The F6K Component Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 13 mm Hard Dome Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend.

Okay, so what does this all mean to you? Simply, High Quality Speakers you can count on for rigorous competition and yet flexible and affordable enough to use as a system starter.

• Heavy Gauge Steel Powder Coated Baskets
• High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
• Two Piece Metal Mesh Grills
• Custom Blended Poly Mica / Paper Cones 
• Butyl Rubber Surrounds 
• High Quality Cloth Spider with Polyester Fiber
• 1" High Temperature KSV Voice Coils
• 13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
• Custom High quality Grade 12dB Crossovers

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR2 Toro Audio Micro Sized Mono Block Amplifier is rated at 500 Watts RMS and 1000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The MR2 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller.

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• High Efficiency Class-D Design for Subwoofers (MR2)
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1-OHM Stable Operation with Extensive Output Power Increase 
• Variable Gain Control
• Remote Level Control Port (for optional controller)

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 130oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Over Sized Mirror Image Dual Poly / Nomex Spiders

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 130oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Dual Black Poly Cotton Spiders with Mirror Image Layout

In a competition system this becomes more critical. TORO Tech presents the ultimate low frequency solution for both competitors and audiophiles alike. Our Rage series Mono Block Amplifiers feature a MOSFET power supply to insure an inexhaustible stream of voltage under all conditions. These Mono Block Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. With competitors in mind we have designed the R5 to remain stable with as little as 1 Ohm loads.

The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as Nickle plated terminal blocks for power input & speaker output. 

Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R5 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• 0 AWG Power / Ground Inputs 
• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Install a TORO Force Subwoofer and rest assured that The Force will always accompany you in your cruiser of choice. Whether you’re Luke Skywalker or  Tobey Marshall our TORO Force series Subwoofers have the “parts you are looking for”. Carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 3" / 76.5mm 4-Layer Hi-Temperature Aluminum Voice Coil for Extended Playing 
• Double Stacked 350oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Over Sized Mirror Image Triple Poly / Nomex Spiders

In a competition system this becomes more critical. TORO Tech presents the ultimate low frequency solution for both competitors and audiophiles alike. Our Rage series Mono Block Amplifiers feature a MOSFET power supply to insure an inexhaustible stream of voltage under all conditions. These Mono Block Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. With competitors in mind we have designed the R6 to remain stable with as little as 1 Ohm loads.

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversized 0 AWG Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)