Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)
Four FORCE 8 SUBS + R6 AMP (8000 Watts)

Four FORCE 8 SUBS + R6 AMP (8000 Watts)

Regular price $1,600.00 Sale price $789.99
Save $810.01

27 in stock

four FORCE 8 Dual 4 Ohm Subwoofers Matched up to the R6 8000 Watt Max Mono Block Amplifier! 

Carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 8 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 


FORCE 8 FEATURES

  • Heavy Duty Textured Cast Aluminum Basket
  • Reinforced Non-Pressed Paper Cone 
  • EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
  • 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
  • Double Stacked 130oz High Energy Strontium Ferrite Magnets 
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Black Anodized One Piece Pole-Plate for Added Motor Force
  • Customized Rubber Gasket / Magnet Boot
  • 8 Gauge Oxygen Free, Silver Tinned, Pure Copper Wire 
  • Over Sized Mirror Image Dual Poly / Nomex Spiders


FORCE 8 SPECIFICATIONS

Size 8"
Peak Watts 1600w  (Short Bursts) 
RMS Watts 800w  (Daily Driver) 
Freq. Response 54Hz ~ 250Hz
Displacement 0.05 cu. ft.
Fs- F.A.R. 54Hz 
Qts 0.41
Vas 0.09 ct. Ft. 
X-Max (2-Way) 24mm
SPL 82dB
Voice Coil 2.5" Dual 4 Ohm
Terminals 8 Gauge 100% Copper Direct Input Cables  
Basket Die Cast Aluminum 
Tinsel Leads Heavy Duty Triple
Ported Box  18" x 14" x 12" (Round Port - One x 4" x 12") 
Sealed Box  
Total Weight  19 Pounds


R6 FEATURES

  • Sound Quality Class-D Design
  • Built-In Auto Sensing Turn-On Function (Hi-Inputs)
  • MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
  • Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
  • Variable Low Pass Electronic Crossover
  • Selectable Bass Boost EQ ~ 0 ~ 12dB
  • Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
  • Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
  • Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
  • 0.5Ω Stable Operation with Extensive Output Power Increase
  • Variable Gain Control
  • Remote Level Control Port (for optional controller)

R6 SPECIFICATIONS

RMS Power @ 0.5 Ohm 4000w x 1
PEAK Power 8000w x 1
RMS @ 1 Ohm 3200w x 1
RMS @ 2 Ohms 2000w x 1
RMS @ 4 Ohms 1300w x 1
Bridged RMS N/A
Min Impedance 0.5 Ohm
LPF / HPF 60Hz ~ 220Hz
THD @ RMS Power <1% 
S/N (EIA Rated) >100 dB
Max Voltage 14.5v
RCA Voltage 200mV  ~ 10V
Freq. Response 13Hz - 220kHz
Crossover Slope 12dB
Subsonic Filter 0Hz ~ 60Hz
Bass EQ  0Hz ~ 12dB
Subwoofer EQ 30Hz ~ 120Hz 
Dimensions Inches 20.9 (in) x 2.0 (in) x 7.1 (in)
Dimensions mm 531mm x 54mm x 171mm 

 

No Manual

You may also like