Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS
Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS

Two FIERCE12S SUBS + R6 AMPLIFIER @ 1Ω | 2300 Watts RMS

Regular price Price: $1,258.40 Sale price
SALE: $999.98

Two Fierce 12s Dual 4 Ohm Subwoofers matched up to the R6 Mono Block Amplifier! 

The FIERCE12s has Dual 3" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

  • Heavy Duty Textured Cast Aluminum Basket
  • Reinforced Non-Pressed Paper Cone
  • EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
  • 3" / 76.5mm, 4-Layer Hi-Temperature Voice Coil for Extended Playing 
  • Double Stacked 180oz High Energy Strontium Ferrite Magnets 
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Black Anodized One Piece Pole-Plate for Added Motor Force
  • Over Sized Mirror Image Dual Poly/ Nomex Spiders
  • Reinforced Fiberglass Woven Dustcap for High Power Applications
  • Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
  • Customized Rubber Gasket / Magnet Boot
  • Stitched Cone for an Extended Lifespan
  • 10 Gauge Oxygen Free, Pure Copper Wire
  • Triple Black Poly Cotton Spiders with Mirror Image Layout

Size 12"
Peak Watts 2000w  (Short Bursts) 
RMS Watts 1000w  (Daily Driver) 
Freq. Response 20Hz ~ 250Hz
Displacement 0.18 cu. ft.
Fs- F.A.R. 34Hz 
Qts 0.59
Vas 0.76 ct. Ft. 
X-Max (2-Way) 28mm
SPL 87dB
Voice Coil 3" Dual 4 Ohm
Terminals 8 Gauge 100% Copper Direct Input Cables  
Basket Die Cast Aluminum 
Tinsel Leads Heavy Duty Double
Ported Box 24" x 18" x 14" (Round Port  - Two x 4" x 12") 
Total Weight 28 Pounds



  • Sound Quality Class-D Design
  • Built-In Auto Sensing Turn-On Function (Hi-Inputs)
  • MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
  • Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
  • Variable Low Pass Electronic Crossover
  • Selectable Bass Boost EQ ~ 0 ~ 12dB
  • Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
  • Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
  • Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
  • 0.5Ω Stable Operation with Extensive Output Power Increase
  • Variable Gain Control
  • Remote Level Control Port (for optional controller)
RMS Power @ 0.5 Ohm 3200w x 1
PEAK Power 8000w x 1
RMS @ 1 Ohm 2300w x 1
RMS @ 2 Ohms 1300w x 1
RMS @ 4 Ohms 700w x 1
Bridged RMS N/A
Min Impedance 0.5 Ohm
LPF / HPF 60Hz ~ 220Hz
THD @ RMS Power <1% 
S/N (EIA Rated) >100 dB
Max Voltage 14.5v
RCA Voltage 200mV  ~ 10V
Freq. Response 13Hz - 220kHz
Crossover Slope 12dB
Subsonic Filter 0Hz ~ 60Hz
Bass EQ  0dB ~ 12dB
Subwoofer EQ 30Hz ~ 120Hz 
Dimensions Inches 20.9 (in) x 2.0 (in) x 7.1 (in)
Dimensions mm 531mm x 54mm x 171mm 

 

MANUALS & DOWNLOADS
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s

You may also like