Four of the FIERCE12S Dual 4 Ohm Subwoofers Matched up to the R6 3200 Watt RMS @ 0.5 Ohm Mono Block Amplifier! 

The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE12S has Dual 3" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 10 Gauge Pure Copper Wire. GET READY TO GET FIERCE…

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 3" / 76.5mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 180oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Triple Black Poly Cotton Spiders with Mirror Image Layout

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Two Force 15s Dual 2 Ohm Subwoofers Matched up to the R6 Mono Block Amplifier @ 0.5Ω 

The acclimated FORCE15s was created by carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversized 0 AWG Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 3" / 76.5mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 350oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Silver Tinned, Pure Copper Wire 
• Over Sized Mirror Image Dual Poly / Nomex Spiders

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Two Force 12s Dual 2 Ohm Subwoofers Matched up to the R6 Mono Block Amplifier @ 0.5Ω 

The acclimated FORCE12s was created by carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversized 0 AWG Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 3" / 76.5mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 350oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Over Sized Mirror Image Dual Poly / Nomex Spiders

R6 FEATURES

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Two Fierce 12s Dual 4 Ohm Subwoofers matched up to the R6 Mono Block Amplifier! 

The FIERCE12s has Dual 3" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 3" / 76.5mm, 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 180oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire
• Triple Black Poly Cotton Spiders with Mirror Image Layout
  
  

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Four of the FIERCE12 Dual 4 Ohm Subwoofers Matched up to the R6 3200 Watt RMS @ 0.5 Ohm Mono Block Amplifier! 

The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE12 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 10 Gauge Pure Copper Wire. GET READY TO GET FIERCE…

The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output. 

Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 130oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Dual Black Poly Cotton Spiders with Mirror Image Layout

• Sound Quality Class-D Design
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 0.5Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

The FORCE SX Mega Series was designed for the highest levels of competition with SPL only possible on mega subwoofer designs as seen with the FORCE15SX. Here is a breakdown of the key features and benefits of the FORCE15SX - 15" 6000 Watt RMS Cast Basket Mega Subwoofer. 

Quality Components: TORO emphasizes the careful selection of high-quality components, from Tinsel Leads to Cast Aluminum Baskets to 8 Gauge Wire to Triple Stacked Strontium Ferrite Magnets. This indicates a commitment to crafting a premium subwoofer.

Deep and Loud Performance: With a power handling of 6000 Watts RMS and 12,000 Watts for frequency burping the TORO FORCE SX Subwoofers can go "Deeper & play Louder" compared to the competition regardless of the price point. They are truly the crème de la crème of subwoofers. 

Dual Voice Coils: The Dual Voice Coil configuration provides flexibility in system design, allowing users to configure their audio setup according to their preferences while providing high power handling.

Overall Design Balance: TORO's goal is to strike a balance between playing loud, playing deep, and maintaining composure. This means that TORO FORCE SX Series subwoofers are engineered to deliver both impressive volume and quality audio performance.

Overall, the TORO Force SX Subwoofer series is the top-tier choice for those seeking high-performance, reliable, and balanced subwoofers for their audio systems. 

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 4" / 99.2mm 4-Layer Hi-Temperature Aluminum Voice Coil for Extended Playing 
• Double Stacked 500oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 8 Gauge Oxygen Free, Pure Copper Wire 
• Over-Sized Mirror Image Triple Poly / Nomex Spiders

The FIERCE12 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.

The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickel plated terminal block for power input & speaker output. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style.

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
• Double Stacked 250oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Over Sized Mirror Image Dual Poly/ Nomex Spiders
• Reinforced Fiberglass Woven Dustcap for High Power Applications
• Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
• Customized Rubber Gasket / Magnet Boot
• Stitched Cone for an Extended Lifespan
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Triple Black Poly Cotton Spiders with Mirror Image Layout

• 0 AWG Power / Ground Inputs 
• Sound Quality Class-D Design
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Selectable Bass Boost EQ ~ 0 ~ 12dB
• Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)

The FORCE SR Series was designed for competition with SPL and intense bass reproduction! Here is a breakdown of the key features and benefits of the FORCE15SR - 15" 3000 Watt RMS Cast Basket Mega Subwoofer. 

Quality Components: TORO emphasizes the careful selection of high-quality components, from Tinsel Leads to Cast Aluminum Baskets to 10 Gauge Wire to Double Stacked Strontium Ferrite Magnets. This indicates a commitment to crafting a premium subwoofer.

Deep and Loud Performance: TORO Force series Subwoofers can go "Deeper & play Louder" compared to the competition at double the price point. They are truly designed for powerful and immersive bass reproduction.

Dual Voice Coils: The Dual Voice Coil configuration provides flexibility in system design, allowing users to configure their audio setup according to their preferences while providing high power handling.

Overall Design Balance: TORO's goal is to strike a balance between playing loud, playing deep, and maintaining composure. This means that TORO FORCE Series subwoofers are engineered to deliver both impressive volume and quality audio performance.

Overall, the TORO Force Subwoofer series is a top-tier choice for those seeking high-performance, reliable, and balanced subwoofers for their audio systems. 

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 4" / 99.2mm 4-Layer Hi-Temperature Aluminum Voice Coil for Extended Playing 
• Double Stacked 430oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Over-Sized Mirror Image Triple Poly / Nomex Spiders

The FORCE SR Series was designed for competition with SPL and intense bass reproduction! Here is a breakdown of the key features and benefits of the FORCE12SR - 12" 3000 Watt RMS Cast Basket Mega Subwoofer. 

Quality Components: TORO emphasizes the careful selection of high-quality components, from Tinsel Leads to Cast Aluminum Baskets to 10 Gauge Wire to Double Stacked Strontium Ferrite Magnets. This indicates a commitment to crafting a premium subwoofer.

Deep and Loud Performance: TORO Force series Subwoofers can go "Deeper & play Louder" compared to the competition at double the price point. They are truly designed for powerful and immersive bass reproduction.

Dual Voice Coils: The Dual Voice Coil configuration provides flexibility in system design, allowing users to configure their audio setup according to their preferences while providing high power handling.

Overall Design Balance: TORO's goal is to strike a balance between playing loud, playing deep, and maintaining composure. This means that TORO FORCE Series subwoofers are engineered to deliver both impressive volume and quality audio performance.

Overall, the TORO Force Subwoofer series is a top-tier choice for those seeking high-performance, reliable, and balanced subwoofers for their audio systems. 

• Heavy Duty Textured Cast Aluminum Basket
• Reinforced Non-Pressed Paper Cone 
• EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
• 4" / 99.2mm 4-Layer Hi-Temperature Aluminum Voice Coil for Extended Playing 
• Double Stacked 430oz High Energy Strontium Ferrite Magnets 
• Enhanced Cooling T-yoke Design with Black Anodized Finish
• Black Anodized One Piece Pole-Plate for Added Motor Force
• Customized Rubber Gasket / Magnet Boot
• 10 Gauge Oxygen Free, Pure Copper Wire 
• Over-Sized Mirror Image Triple Poly / Nomex Spiders