This MOLEX 4 Pin speaker input plug connects to the TORO Micro Rage MR2 - Mono Block and the MRX2 - 2 Channel Micro Amplifiers. 

Both positives inputs are internally wired together. The same applies for both negative leads. This allows you to connect both positives together or allows you to connect 2 different speakers positives or negatives. 

This MOLEX 8 Pin speaker input plug connects to the TORO Micro Rage MRX4 - 4 Channel Micro Amplifiers. 

Both sets of positives inputs are internally wired together. The same applies for both sets of negative leads. This allows you to connect both sets of positives together or allows you to connect 2 different speakers positives or negatives. 

Remote Gain Knob for all Toro Tech Audio Rage Mono and Rage Micro Mono Block Amplifiers. This remote will allow you to lower the signal of the amplifiers gain. This is useful when lowing the subwoofer volume quickly is needed. 

• 17 Foot Cable 
• Gain knob to control bass 
• Mounting brackets

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR2 Toro Audio Micro Sized Mono Block Amplifier is rated at 500 Watts RMS and 1000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The MR2 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller.

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• High Efficiency Class-D Design for Subwoofers (MR2)
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1-OHM Stable Operation with Extensive Output Power Increase 
• Variable Gain Control
• Remote Level Control Port (for optional controller)

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR3 Toro Audio Micro Sized Mono Block Amplifier is rated at 800 Watts RMS and 2000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The MR3 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller.

With a tiny footprint of only 6.46" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• High Efficiency Class-D Design for Subwoofers 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1-OHM Stable Operation with Extensive Output Power Increase 
• Variable Gain Control

Looking to get noticed, you need look no further. Just one glance and you know these TORO Amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. 

The MRx2 Toro Audio Micro Sized Mono Block Amplifier is designed to operate in Mono for powering a Subwoofer system or Stereo for powering Mid Range or High Frequency drivers. is rated at 150 Watts x 2 @ 4 Ohms RMS and 250 Watts RMS x 2 @ 2 Ohm. This high quality Class-D Digital PCB layout includes a built-in auto sensing turn on function for vehicles that do not have the ability for RCA output.

The MRx2 utilizes High Pass, Low Pass and Full Range switching. Additionally a X1 and X10 switch that works in conjunction with the crossover allows for fine tuned frequency adjustments by increasing LPF or HPF frequencies by the power of 10. 

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• Sound Quality Full Range Class-D Design 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• X1 and X10 Switching for HPF / LPF Crossover 
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control

Looking to get noticed, you need look no further. Just one glance and you know these TORO Amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point

Whether designing a system for competition, sound quality or casual listening TORO has the best solution. Our Micro Rage Series Class D Amplifiers have all the “Right Stuff” and then some.

Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. 

The MRx4 is equally comfortable as a 2, 3 or 4 Channel solution for enabling future system expansion or re-configuration. All Full Range Amplifiers feature variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with gold plated RCA jacks for as well as an oversize gold plated terminal block for power input & speaker output. What does all this translate to? Simply, Amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

The MRx4 Toro Audio Micro Sized Mono Block Amplifier is rated at 80 Watts x 4 @ 4 Ohms RMS and 130 Watts RMS x 4 @ 2 Ohm. This high quality Class-D Digital PCB layout includes a built-in auto sensing turn on function for vehicles that do not have the ability for RCA output.

The MRx4 utilizes a 2/4 channel switch that allows all 4 channels to function with only 2 RCA inputs. This would benefit the user to utilize all 4 channels regardless of the source unit like a phone or standard head unit.

The High Pass and Low Pass Filter knob has a frequency setting from 20Hz ~ 300Hz based on your speakers and system setup requirements. 

With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.  

• MOLEX Speaker Harness INCLUDED
• Sound Quality Full Range Class-D Design 
  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• 2/4 Channel Switch for Left and Right Phone Source Units
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass Electronic Crossover
• Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• Variable Gain Control

• Sound Quality Full Range Class-D Design
• Differential Input Switch to Eliminate Noise 
• Clip LED to Indicate Signal Clipping  
• Built-In Auto Sensing Turn-On Function (Hi-Inputs)
• MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
• Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
• Variable Low Pass, High Pass, Full Range Electronic Crossover
• 45Hz Fixed Bass Boost From 0 ~ 12dB
• Differential input switching to prevent ground noise. 
• Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 50Hz
• Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
• 1Ω Stable Operation with Extensive Output Power Increase
• Variable Gain Control
• Remote Level Control Port (for optional controller)