SLIM10 | 300 Watt RMS Compact Powered Active Low Profile Under-Seat Car Subwoofer
Regular price
$263.00
Save $-263.00
The SLIM10 is a powerful 10" plug and play solution for easily adding a subwoofer to any vehicle without taking up a lot of space. This compact hideaway amplified 10" powered subwoofer hits hard and is perfect for trucks and under the seat applications. It is designed to be extremely versatile with practical features like tone control, bass boost, 0 ~180 degree Phase Shift button and Clip Level LED Indicator.
The built-in 300 Watt RMS Amplifier utilizes a MOSFET power supply to insure an inexhaustible stream of voltage under all conditions for high output and increased stability. A variable gain control and remote bass level controller is even included.
These Amplifiers utilize a Class A/B design for high quality and cool running under typical conditions. With a High Quality PCB layout that includes built-in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
With a slim footprint of only 13.5" x 10.6" x 3" this powerful amplifier subwoofer combo comes in handy for installations that are limited on space and is the perfect choice for trucks, lease cars and under the seat installations.
FEATURES:
High Efficiency Class A/B Design
0 ~ 180 Degree Phase Shift
3 Ohm Impedance
Built-In High Level Signal Inputs (via RCA Inputs)
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Ground Loop Isolator
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
One FIERCE8 SUB + R2 AMPLIFIER @ 2Ω | 400 Watts RMS
Regular price
$420.00
Save $-420.00
One Fierce 8 Subwoofer (400w RMS) + One R2 Monoblock Amplifier (320w RMS)
The FIERCE8 can take up to 400 Watts RMS and has 2" Dual 4 Ohm Voice Coils that can be wired to a 2 or 4 ohm final load each.
Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard wired into the subwoofers leads.
The R2 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with nickel plated RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output.
Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R2 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With a frequency range for a monoblock amp from 12Hz ~ 50kHz this versatile amp can power a wide range of speakers.
What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.
FIERCE 8 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2" / 50.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 90oz High Energy Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Customized Rubber Gasket / Magnet Boot
10 Gauge Oxygen Free, Pure Copper Wire
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 8 SPECIFICATIONS
Size
8"
Peak Watts
800w (Short Bursts)
RMS Watts
400w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.04 cu. ft.
Fs- F.A.R.
54Hz
Qts
0.47
Vas
0.09 ct. Ft.
X-Max (2-Way)
20mm
SPL
84dB
Voice Coil
2" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
16" x 14" x 12" (Round Port - One x 4" x 12")
Total Weight
15 Pounds
R2 FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
2Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Two Fierce 8 Subwoofers (800 Watts RMS) + One MR3 Micro Monoblock Amplifier (800 Watts RMS)
The FIERCE 8 can take up to 400 Watts RMS each and has 2" Inch Dual 4 Ohm Voice Coils that combined can be wired for a 1 ohm final load. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE 8 has Dual 2" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard wired into the subwoofers leads
Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR3 Toro Audio Micro Sized Mono Block Amplifier is rated at 800 Watts RMS and 2000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The MR3 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller.
With a tiny footprint of only 6.46" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.
FIERCE 8 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2" / 50.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 90oz High Energy Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Customized Rubber Gasket / Magnet Boot
10 Gauge Oxygen Free, Pure Copper Wire
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 8 SPECIFICATIONS (each)
Size
8"
Peak Watts
800w (Short Bursts)
RMS Watts
400w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.04 cu. ft.
Fs- F.A.R.
54Hz
Qts
0.47
Vas
0.09 ct. Ft.
X-Max (2-Way)
20mm
SPL
84dB
Voice Coil
2" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
16" x 14" x 12" (Round Port - One x 4" x 12")
Total Weight
15 Pounds
MR3 FEATURES
High Efficiency Class-D Design for Subwoofers (MR2)
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
1-OHM Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Two Pair of F6K - 6.5" Component Speakers + RX4S Amplifier | 80w x 4 RMS
Regular price
$760.00
Save $-760.00
Grab 2 Pair (4 speakers, Tweeters & Crossovers) of Fierce 6.5" Component Speakers powered by the RX4S 4-Channel Amplifier!
TOROFierceSeries 6 Inch Car Component Speakers are the result of decades of audio engineering and music listening plus the experience of countless sound competitions. The F6K ComponentSpeakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 13 mm Hard Dome Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend.
The RX4S Toro Audio Multi Channel Amplifier is rated at 100 Watts x 4 @ 4 Ohms RMS and 1200 Watts Peak Music Power. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The RX4S Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control.
With a frequency range from 14Hz ~ 50kHz this versatile amp can power a wide range of subwoofers and speakers.
F6K FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
Custom High quality Grade 12dB Crossovers
F6K SPECIFICATIONS
Speaker Size
6.5"
Tweeter
13mm Hard Dome Ferro Fluid
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-10KHz
RMS Power
100 watts (50w per speaker)
Peak Power
200 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
RX4S FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
Tiffany Style Nickle Plated RCA Inputs
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass & High Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
This is our favorite combo pack! Two Fierce12 Dual 4 Ohm Subwoofers Matched perfectly to the R5 Mono Block Amplifier!
The FIERCE12 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.
The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickel plated terminal block for power input & speaker output. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FIERCE 12 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 250oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Over Sized Mirror Image Dual Poly/ Nomex Spiders
Reinforced Fiberglass Woven Dustcap for High Power Applications
Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
Customized Rubber Gasket / Magnet Boot
Stitched Cone for an Extended Lifespan
10 Gauge Oxygen Free, Pure Copper Wire
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 12 SPECIFICATIONS
Size
12"
Peak Watts
1600w (Short Bursts)
RMS Watts
800w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.10 cu. ft.
Fs- F.A.R.
33Hz
Qts
0.52
Vas
0.95 ct. Ft.
X-Max (2-Way)
25mm
SPL
86dB
Voice Coil
2.5" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
24" x 18" x 14" (Round Port - Two x 4" x 12")
Total Weight
22 Pounds
R5 FEATURES
0 AWG Power / Ground Inputs
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
1Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Two Fierce 6 Subwoofers (400 Watts RMS) + One MR2 Micro Monoblock Amplifier (500 Watts RMS)
The FIERCE 6 can take up to 200 Watts RMS each and has 1.5" Inch Dual 4 Ohm Voice Coils that combined can be wired for a 1 ohm final load. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE 6 has Dual 1.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard wired into the subwoofers leads.
Our compact Micro Rage Amplifiers feature MOSFET power supplies to insure an inexhaustible stream of voltage under all conditions. These Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. The MR2 Toro Audio Micro Sized Mono Block Amplifier is rated at 500 Watts RMS and 1000 Watts Maximum Power. Stable at 1 Ohm with a high quality Class D Digital PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The MR2 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller.
With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.
FIERCE 6 FEATURES
Heavy Duty Textured Cast Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
1.5" / 38.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 70oz High Energy Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Customized Rubber Gasket / Magnet Boot
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 6 SPECIFICATIONS (each)
Size
6.5"
Peak Watts
400w (Short Bursts)
RMS Watts
200w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.03 cu. ft.
Fs- F.A.R.
57Hz
Qts
0.53
Vas
0.09 ct. Ft.
X-Max (2-Way)
18mm
SPL
82dB
Voice Coil
1.5" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
16" x 11" x 10" (Round Port - One x 3" x 12")
Total Weight
11 Pounds
MR2 FEATURES
High Efficiency Class-D Design for Subwoofers (MR2)
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
1-OHM Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Two Pair of F6 - 6.5" 3-Way Coaxial Speakers + RX4S Amplifier | 80w x 4 RMS
Regular price
$590.00
Save $-590.00
2 Pair (Four F6 | 6.5 Inch Coaxial Speakers) + RX4S | 80w x 4 Multi-Channel Amplifier
The F6 3-Way Coaxial Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 30mm Mid-Range Tweeters, 13mm Super Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend.
The RX4S Toro Audio Multi Channel High Performance Amplifier is rated at 100 Watts x 4 @ 4 Ohms RMS and 1200 Watts Peak Music Power. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
F6 FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
30mm Mid-Range Tweeter
F6 SPECIFICATIONS
Speaker Size
6.5"
Super Tweeter
13mm Ferro Fluid
Mid-Range Tweeter
30mm Harmonized Housing
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-20KHz
RMS Power
60 watts (30w per speaker)
Peak Power
120 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
RX4S FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
Tiffany Style Nickle Plated RCA Inputs
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass & High Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
Four FORCE 8 SUBS + R6 AMPLIFIER @ 0.5Ω | 3200 Watts RMS
Regular price
$2,690.00
Save $-2,690.00
Four of the FORCE 8 Dual 4 Ohm Subwoofers Matched up to the R6 3200 Watt RMS @ 0.5 Ohm Mono Block Amplifier!
Carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…
The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output.
Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FORCE 8 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 130oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Customized Rubber Gasket / Magnet Boot
10 Gauge Oxygen Free, Pure Copper Wire
Over Sized Mirror Image Dual Poly / Nomex Spiders
FORCE 8 SPECIFICATIONS
Size
8"
Peak Watts
1600w (Short Bursts)
RMS Watts
800w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.05 cu. ft.
Fs- F.A.R.
54Hz
Qts
0.41
Vas
0.09 ct. Ft.
X-Max (2-Way)
24mm
SPL
82dB
Voice Coil
2.5" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
18" x 14" x 12" (Round Port - One x 4" x 12")
Total Weight
19 Pounds
R6 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
0.5Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Two Fierce 12s Dual 4 Ohm Subwoofers matched up to the R6 Mono Block Amplifier!
The FIERCE12s has Dual 3" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.
The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output.
Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style.
What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.
FIERCE 12S FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
3" / 76.5mm, 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 180oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Over Sized Mirror Image Dual Poly/ Nomex Spiders
Reinforced Fiberglass Woven Dustcap for High Power Applications
Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
Customized Rubber Gasket / Magnet Boot
Stitched Cone for an Extended Lifespan
10 Gauge Oxygen Free, Pure Copper Wire
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 12S SPECIFICATIONS
Size
12"
Peak Watts
2000w (Short Bursts)
RMS Watts
1000w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.18 cu. ft.
Fs- F.A.R.
34Hz
Qts
0.59
Vas
0.76 ct. Ft.
X-Max (2-Way)
28mm
SPL
87dB
Voice Coil
3" Dual 4 Ohm
Terminals
8 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
24" x 18" x 14" (Round Port - Two x 4" x 12")
Total Weight
28 Pounds
R6 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
0.5Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s
Pair of F6 + F6K - 6.5" Coaxial & Component Speakers + MRX4 Micro Amplifier | 80w x 4 RMS
Regular price
$570.00
Save $-570.00
Grab One Pair of F6K - 6.5" Component Speakers Plus One Pair of F6 - 6.5" 3-Way Coaxial Speakers Powered by the MRX4 Four Channel Micro Sized Amplifier!
The F6K Component Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 13 mm Hard Dome Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend
The F6 3-Way Coaxial Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 30mm Mid-Range Tweeters, 13mm Super Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper
TheMRx4is equally comfortable as a 2, 3 or 4 Channel solution for enabling future system expansion or re-configuration. All Full Range Amplifiers feature variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with gold plated RCA jacks for as well as an oversize gold plated terminal block for power input & speaker output. What does all this translate to? Simply, Amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.
The MRx4 Toro Audio Micro Sized Mono Block Amplifier is rated at 80 Watts x 4 @ 4 Ohms RMS and 130 Watts RMS x 4 @ 2 Ohm. This high quality Class-D Digital PCB layout includes a built-in auto sensing turn on function for vehicles that do not have the ability for RCA output. A 2/4 channel switch that allows all 4 channels to function with only 2 RCA inputs. This would benefit the user to utilize all 4 channels regardless of the source unit like a phone or standard head unit.
The High Pass and Low Pass Filter knob has a frequency setting from 20Hz ~ 300Hz based on your speakers and system setup requirements. With a tiny footprint of only 5.75" x 1.69" x 3.07" this powerful amplifier comes in handy for installations that are limited on space and is the perfect choice for motorcycles and power-sports vehicles.
F6 FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
30mm Mid Range Tweeter
F6 SPECIFICATIONS
Speaker Size
6.5"
Super Tweeter
13mm Ferro Fluid
Mid-Range Tweeter
30mm Harmonized Housing
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-20KHz
RMS Power
60 watts (30w per speaker)
Peak Power
120 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
F6K FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
Custom High quality Grade 12dB Crossovers
F6K SPECIFICATIONS
Speaker Size
6.5"
Tweeter
13mm Hard Dome Ferro Fluid
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-10KHz
RMS Power
100 watts (50w per speaker)
Peak Power
200 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
MRX4 FEATURES
MOLEX Speaker Harness INCLUDED
Sound Quality Full Range Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
2/4 Channel Switch for Left and Right Phone Source Units
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Self-Diagnostic Protection Circuit with LED Status Indicator for; Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
Pair of F6 + F6K - 6.5" Coaxial & Component Speakers + RX4 Amplifier | 65w x 4 RMS
Regular price
$518.00
Save $-518.00
Grab One Pair of F6K - 6.5" Component Speakers Plus One Pair of F6 - 6.5" 3-Way Coaxial Speakers Powered by the RX4 Four Channel Amplifier!
The F6K Component Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 13 mm Hard Dome Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend
The F6 3-Way Coaxial Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 30mm Mid-Range Tweeters, 13mm Super Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper
The RX4 Toro Audio Multi Channel Amplifier is rated at 65 Watts x 4 @ 4 Ohms RMS and 180 Watts x 2 RMS @ 4 ohm bridged. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks. The RX4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control. With a frequency range from 14Hz ~ 50kHz this versatile amp can power a wide range of subwoofers and speakers.
F6 FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
30mm Mid Range Tweeter
F6 SPECIFICATIONS
Speaker Size
6.5"
Super Tweeter
13mm Ferro Fluid
Mid-Range Tweeter
30mm Harmonized Housing
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-20KHz
RMS Power
60 watts (30w per speaker)
Peak Power
120 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
F6K FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
Custom High quality Grade 12dB Crossovers
F6K SPECIFICATIONS
Speaker Size
6.5"
Tweeter
13mm Hard Dome Ferro Fluid
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-10KHz
RMS Power
100 watts (50w per speaker)
Peak Power
200 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
RX4S FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass & High Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
Four Fierce 6 Subwoofers (800 Watts RMS) + One R4 Monoblock Amplifier (1050 Watts RMS)
The FIERCE 6can take up to 200 Watts RMS each and has 1.5" Inch Dual 4 Ohm Voice Coils that combined can be wired for a 1 ohm final load. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE 6 has Dual 1.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard wired into the subwoofers leads.
The R4 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections withTiffany style RCA jacks for as well as Nickle plated terminal blocks for power input & speaker output. Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks. The R4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R4 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FIERCE 6 FEATURES
Heavy Duty Textured Cast Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
1.5" / 38.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 70oz High Energy Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Customized Rubber Gasket / Magnet Boot
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 6 SPECIFICATIONS (each)
Size
6.5"
Peak Watts
400w (Short Bursts)
RMS Watts
200w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.03 cu. ft.
Fs- F.A.R.
57Hz
Qts
0.53
Vas
0.09 ct. Ft.
X-Max (2-Way)
18mm
SPL
82dB
Voice Coil
1.5" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
16" x 11" x 10" (Round Port - One x 3" x 12")
Total Weight
11 Pounds
R4 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
1Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
4 AWG Power and Ground Terminals
Remote Level Control Port (for optional controller)
Two Force 15s Dual 2 Ohm Subwoofers Matched up to the R6 Mono Block Amplifier @ 0.5Ω
The acclimated FORCE15s was created by carefully selecting each component from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…
The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversized 0 AWG Nickle plated terminal block for power input & speaker output.
Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style.
What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.
FORCE 15s FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
3" / 76.5mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 350oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Customized Rubber Gasket / Magnet Boot
10 Gauge Oxygen Free, Silver Tinned, Pure Copper Wire
Over Sized Mirror Image Dual Poly / Nomex Spiders
FORCE 15s SPECIFICATIONS
Size
15"
Peak Watts
4000w (Short Bursts)
RMS Watts
2000w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.21 cu. ft.
Fs- F.A.R.
36Hz
Qts
0.4
Vas
1.06 ct. Ft.
X-Max (2-Way)
38mm
SPL
88dB
Voice Coil
3" Dual 2 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Triple
Ported Box
28" x 20" x 19" (Round Port - Two x 4" x 16")
Total Weight
55 Pounds
R6 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
0.5Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s
Two Pair of F6 - 6.5" 3-Way Coaxial Speakers + RX4 Amplifier | 65w x 4 RMS
Regular price
$603.00
Save $-603.00
Grab 2 Pair (4 speakers, Tweeters & Crossovers) of Fierce 6.5" Component Speakers powered by the RX4 4-Channel Amplifier!
The F6 3-Way Coaxial Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 30mm Mid-Range Tweeters, 13mm Super Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper
The RX4 Toro Audio Multi Channel Amplifier is rated at 65 Watts x 4 @ 4 Ohms RMS and 180 Watts x 2 RMS @ 4 ohm bridged. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The RX4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control.
With a frequency range from 14Hz ~ 50kHz this versatile amp can power a wide range of subwoofers and speakers.
F6 FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
30mm Mid Range Tweeter
F6 SPECIFICATIONS
Speaker Size
6.5"
Super Tweeter
13mm Ferro Fluid
Mid-Range Tweeter
30mm Harmonized Housing
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-20KHz
RMS Power
60 watts (30w per speaker)
Peak Power
120 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
RX4S FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass & High Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
Two Pair of F6K - 6.5" Component Speakers + RX4 Amplifier | 65w x 4 RMS
Regular price
$603.00
Save $-603.00
Grab 2 Pair (4 speakers, Tweeters & Crossovers) of Fierce 6.5" Component Speakers powered by the RX4 4-Channel Amplifier!
TOROFierceSeries 6.5 Inch Car Component Speakers are the result of decades of audio engineering and music listening plus the experience of countless sound competitions. The F6KComponentSpeakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 13 mm Hard Dome Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend.
The RX4 Toro Audio Multi Channel Amplifier is rated at 65 Watts x 4 @ 4 Ohms RMS and 180 Watts x 2 RMS @ 4 ohm bridged. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The RX4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control.
With a frequency range from 14Hz ~ 50kHz this versatile amp can power a wide range of subwoofers and speakers.
F6K FEATURES
Heavy Gauge Steel Powder Coated Baskets
High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
Two Piece Metal Mesh Grills
Custom Blended Poly Mica / Paper Cones
Butyl Rubber Surrounds
High Quality Cloth Spider with Polyester Fiber
1" High Temperature KSV Voice Coils
13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
Custom High quality Grade 12dB Crossovers
F6K SPECIFICATIONS
Speaker Size
6.5"
Tweeter
13mm Hard Dome Ferro Fluid
Cone
Custom Blended Poly Mica / Paper
Sensitivity
93dB
Frequency
50-10KHz
RMS Power
100 watts (50w per speaker)
Peak Power
200 watts
Impedance
4 Ohm
Mounting Depth
2.36"
Mounting Diameter
5.63"
Frame Diameter
6.52"
RX4S FEATURES
Sound Quality Class-A/B Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass & High Pass Electronic Crossover
Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
Two FORCE 8 SUBS + R5 AMPLIFIER @ 1Ω | 1600 Watts RMS
Regular price
$1,575.00
Save $-1,575.00
This is our 2nd favorite combo pack! Two Force 8 Dual 4 Ohm Subwoofers Matched perfectly to the R5 Mono Block Amplifier!
Carefully selecting each component for the FORCE 8, from the Tinsel Leads to the Cast Aluminum Baskets to the 10 Gauge Wire to the Double Stacked Strontium Ferrite Magnets, we have created a Subwoofer series that goes Deeper & plays Louder than our competition. Plus, our inclusion of Dual Voice Coils gives you system design flexibility. Our goal was overall design balance - the ability to play loud, play deep and remain composed. With that in mind we are proud to present the end result, “MAY THE FORCE BE WITH YOU”…
The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickel plated terminal block for power input & speaker output. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FORCE 8 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 130oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Customized Rubber Gasket / Magnet Boot
10 Gauge Oxygen Free, Pure Copper Wire
Over Sized Mirror Image Dual Poly / Nomex Spiders
FORCE 8 SPECIFICATIONS
Size
8"
Peak Watts
1600w (Short Bursts)
RMS Watts
800w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.05 cu. ft.
Fs- F.A.R.
54Hz
Qts
0.41
Vas
0.09 ct. Ft.
X-Max (2-Way)
24mm
SPL
82dB
Voice Coil
2.5" Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Ported Box
18" x 14" x 12" (Round Port - One x 4" x 12")
Total Weight
19 Pounds
R5 FEATURES
0 AWG Power / Ground Inputs
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
1Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Four of the FIERCE12 Dual 4 Ohm Subwoofers Matched up to the R6 3200 Watt RMS @ 0.5 Ohm Mono Block Amplifier!
The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE12 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 10 Gauge Pure Copper Wire. GET READY TO GETFIERCE…
The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output.
Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FIERCE 12 FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
2.5" / 61.1mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 130oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Over Sized Mirror Image Dual Poly/ Nomex Spiders
Reinforced Fiberglass Woven Dustcap for High Power Applications
Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
Customized Rubber Gasket / Magnet Boot
Stitched Cone for an Extended Lifespan
10 Gauge Oxygen Free, Pure Copper Wire
Dual Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 12 SPECIFICATIONS
Size
12"
Peak Watts
1600w (Short Bursts)
RMS Watts
800w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.10 cu. ft.
Fs- F.A.R.
33Hz
Qts
0.52
Vas
0.95 ct. Ft.
X-Max (2-Way)
25mm
SPL
86dB
Voice Coil
2.5"Copper Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy Duty Double
Enclosure Details
Click on Enclosure Info Tab below
Total Weight
22 Pounds
R6 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
0.5Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)
Four of the FIERCE12S Dual 4 Ohm Subwoofers Matched up to the R6 3200 Watt RMS @ 0.5 Ohm Mono Block Amplifier!
The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE12S has Dual 3" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 10 Gauge Pure Copper Wire. GET READY TO GETFIERCE…
The R6 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickle plated terminal block for power input & speaker output.
Stable at 0.5 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
The R6 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control andremotelevel control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R6 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FIERCE 12S FEATURES
Heavy Duty Textured Cast Aluminum Basket
Reinforced Non-Pressed Paper Cone
EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
3" / 76.5mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
Double Stacked 180oz High Energy Strontium Ferrite Magnets
Enhanced Cooling T-yoke Design with Black Anodized Finish
Black Anodized One Piece Pole-Plate for Added Motor Force
Over Sized Mirror Image Dual Poly/ Nomex Spiders
Reinforced Fiberglass Woven Dustcap for High Power Applications
Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace
Customized Rubber Gasket / Magnet Boot
Stitched Cone for an Extended Lifespan
10 Gauge Oxygen Free, Pure Copper Wire
Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 12S SPECIFICATIONS
Size
12"
Peak Watts
2000w (Short Bursts)
RMS Watts
1000w (Daily Driver)
Freq. Response
20Hz ~ 250Hz
Displacement
0.18 cu. ft.
Fs- F.A.R.
34Hz
Qts
0.59
Vas
0.76 ct. Ft.
X-Max (2-Way)
28mm
SPL
87dB
Voice Coil
3"Copper Dual 4 Ohm
Terminals
10 Gauge 100% Copper Direct Input Cables
Basket
Die Cast Aluminum
Tinsel Leads
Heavy DutyDouble
Enclosure Details
Click onEnclosure Info Tabbelow
Total Weight
28 Pounds
R6 FEATURES
Sound Quality Class-D Design
Built-In Auto Sensing Turn-On Function (Hi-Inputs)
MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
Variable Low Pass Electronic Crossover
Selectable Bass Boost EQ ~ 0 ~ 12dB
Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
0.5Ω Stable Operation with Extensive Output Power Increase
Variable Gain Control
Remote Level Control Port (for optional controller)