The PT4 Pro Audio Super Tweeter is a high-powered Aluminum 2.25 Inch / 57mm High Powered Compression Driver with a 25.5mm Voice Coil that can hold bursts of music up to 30 Watts RMS/AES Each @ 100dB! While other manufacturers list peak power as RMS which can damage your system, we rate RMS using AES* standards.
These Super Aluminum flush mount High-Frequency Transducers come with a 6dB Hi-Pass Filter Capacitor to prevent damage from low frequencies. The PT4 is a solid choice for add crisp clear highs to complement your mids and lows in any quality build and is designed for installations on Motorocyucle Faring Gauge Holes.
*The AES continuous power rating describes the average amount of power a speaker can handle over a long period (typical tests last two hours or more). Nominal (Continuous and Peak) SPL is calculated from measured SPL per cabinet (pink noise, crest factor 4) at 1 metre and referred to summed output at 10 metres.
Speaker Size | 1" / 25.5mm |
Tweeter | 2.25" / 57mm |
Sensitivity | 100dB |
Frequency | 3KHz - 22KHz |
RMS Power | 30w |
Music Program | 15w |
Maximum Power |
60w |
Impedance | 4 Ohm |
Voice Coil | 25.5mm |
Magnet | Neodymium Magnets |