






Four Fierce 6 Subwoofers (800 Watts RMS) + One R4 Monoblock Amplifier (1050 Watts RMS)
The FIERCE 6 can take up to 200 Watts RMS each and has 1.5" Inch Dual 4 Ohm Voice Coils that combined can be wired for a 1 ohm final load. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE 6 has Dual 1.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard wired into the subwoofers leads.
The R4 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as Nickle plated terminal blocks for power input & speaker output. Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks. The R4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R4 Amplifier blends power and performance with sleek design allowing you to Rage in style.
FIERCE 6 FEATURES
- Heavy Duty Textured Cast Basket
- Reinforced Non-Pressed Paper Cone
- EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
- 1.5" / 38.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing
- Double Stacked 70oz High Energy Magnets
- Enhanced Cooling T-yoke Design with Black Anodized Finish
- Customized Rubber Gasket / Magnet Boot
- Triple Black Poly Cotton Spiders with Mirror Image Layout
FIERCE 6 SPECIFICATIONS (each)
Size | 6.5" |
Peak Watts | 400w (Short Bursts) |
RMS Watts | 200w (Daily Driver) |
Freq. Response | 20Hz ~ 250Hz |
Displacement | 0.03 cu. ft. |
Fs- F.A.R. | 57Hz |
Qts | 0.53 |
Vas | 0.09 ct. Ft. |
X-Max (2-Way) | 18mm |
SPL | 82dB |
Voice Coil | 1.5" Dual 4 Ohm |
Terminals | 10 Gauge 100% Copper Direct Input Cables |
Basket | Die Cast Aluminum |
Tinsel Leads | Heavy Duty Double |
Ported Box | 16" x 11" x 10" (Round Port - One x 3" x 12") |
Total Weight | 11 Pounds |
R4 FEATURES
- Sound Quality Class-D Design
- Built-In Auto Sensing Turn-On Function (Hi-Inputs)
- MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
- Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
- Variable Low Pass Electronic Crossover
- Selectable Bass Boost EQ ~ 0 ~ 12dB
- Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
- Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
- Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- 1Ω Stable Operation with Extensive Output Power Increase
- Variable Gain Control
- 4 AWG Power and Ground Terminals
- Remote Level Control Port (for optional controller)
R4 SPECIFICATIONS
SPECIFICATIONS:
RMS Power @ 1 Ohm | 1050w x 1 |
PEAK Power | 2500w x 1 |
RMS @ 2 Ohms | 700w x 1 |
RMS @ 4 Ohms | 400w x 1 |
Bridged RMS | N/A |
Min Impedance | 1 Ohm |
LPF / HPF | 60Hz ~ 220Hz |
THD @ RMS Power | <1% |
S/N (EIA Rated) | >100 dB |
Max Voltage | 14.5v |
RCA Voltage | 200mV ~ 10V |
Freq. Response | 13Hz - 220Hz |
Crossover Slope | 12dB |
Subsonic Filter | 0Hz ~ 60Hz |
Bass EQ | 0dB ~ 12dB |
Subwoofer EQ | 30Hz ~ 120Hz |
Dimensions Inches | 10.83 (in) x 2.0 (in) x 7.1 (in) |
Dimensions mm | 275mm x 54mm x 171mm |