This is our favorite combo pack! Two Fierce12 Dual 4 Ohm Subwoofers Matched perfectly to the R5 Mono Block Amplifier!
The FIERCE12 has Dual 2.5" Voice Coils, Ribbed Foam Surrounds with Heavy Duty Cast Aluminum Baskets. Carefully selecting each component from the Tinsel Leads, Direct Connected 10 Gauge Pure Copper Wire to the Double Stacked Strontium Ferrite Magnets we have created a Subwoofer that goes Deeper & plays Louder than our competition.
The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as an oversize Nickel plated terminal block for power input & speaker output. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style.
Size | 12" |
Peak Watts | 1600w (Short Bursts) |
RMS Watts | 800w (Daily Driver) |
Freq. Response | 20Hz ~ 250Hz |
Displacement | 0.10 cu. ft. |
Fs- F.A.R. | 33Hz |
Qts | 0.52 |
Vas | 0.95 ct. Ft. |
X-Max (2-Way) | 25mm |
SPL | 86dB |
Voice Coil | 2.5" Dual 4 Ohm |
Terminals | 10 Gauge 100% Copper Direct Input Cables |
Basket | Die Cast Aluminum |
Tinsel Leads | Heavy Duty Double |
Ported Box | 24" x 18" x 14" (Round Port - Two x 4" x 12") |
Total Weight | 22 Pounds |
RMS Power | 1600w x 1 |
PEAK Power | 4000w x 1 |
RMS @ 2 Ohms | 1100w x 1 |
RMS @ 4 Ohms | 600w x 1 |
Bridged RMS | N/A |
Min Impedance | 1 Ohm |
LPF / HPF | 60Hz ~ 220Hz |
THD @ RMS Power | <1% |
S/N (EIA Rated) | >100 dB |
Max Voltage | 14.5v |
RCA Voltage | 200mV ~ 10V |
Freq. Response | 13Hz - 220kHz |
Crossover Slope | 12dB |
Subsonic Filter | 0Hz ~ 60Hz |
Bass EQ | 0dB ~ 12dB |
Subwoofer EQ | 30Hz ~ 120Hz |
Dimensions Inches | 13.98 (in) x 2.0 (in) x 7.1 (in) |
Dimensions mm | 355mm x 54mm x 171mm |