






2 Pair (Four F6 | 6.5 Inch Coaxial Speakers) + RX4S | 80w x 4 Multi-Channel Amplifier
The F6 3-Way Coaxial Speakers are highly efficient and require less power when creating a musical and winning front sound stage in your vehicle. Features include 30mm Mid-Range Tweeters, 13mm Super Tweeters, Butyl Rubber Surrounds, 1” Voice Coils, Powder Coated Baskets and Custom Cones of a Poly / Mica & Paper blend.
The RX4S Toro Audio Multi Channel High Performance Amplifier is rated at 100 Watts x 4 @ 4 Ohms RMS and 1200 Watts Peak Music Power. Stable at 2 Ohms with a high quality A/B Class PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.
F6 FEATURES
- Heavy Gauge Steel Powder Coated Baskets
- High Energy Y30 Magnets for High Motor Force & Accurate Sound Reproduction
- Two Piece Metal Mesh Grills
- Custom Blended Poly Mica / Paper Cones
- Butyl Rubber Surrounds
- High Quality Cloth Spider with Polyester Fiber
- 1" High Temperature KSV Voice Coils
- 13mm Hard Dome Tweeter with Ferro Fluid Cooled Voice Coils
- 30mm Mid-Range Tweeter
F6 SPECIFICATIONS
Speaker Size | 6.5" |
Super Tweeter | 13mm Ferro Fluid |
Mid-Range Tweeter | 30mm Harmonized Housing |
Cone | Custom Blended Poly Mica / Paper |
Sensitivity | 93dB |
Frequency | 50-20KHz |
RMS Power | 60 watts (30w per speaker) |
Peak Power | 120 watts |
Impedance | 4 Ohm |
Mounting Depth | 2.36" |
Mounting Diameter | 5.63" |
Frame Diameter | 6.52" |
RX4S FEATURES
- Sound Quality Class-A/B Design
- Built-In Auto Sensing Turn-On Function (Hi-Inputs)
- Tiffany Style Nickle Plated RCA Inputs
- MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
- Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
- Variable Low Pass & High Pass Electronic Crossover
- Selectable Bass Boost EQ ~ OFF / 6dB / 12dB
- Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
- Variable Gain Control
RX4S SPECIFICATIONS
RMS @ 4 Ohms | 80w x 4 |
RMS @ 2 Ohms | 100w x 4 |
Bridged RMS @ 4 Ohms | 200w x 2 |
Peak Music Power | 300w x 4 |
Min Impedance | 2 Ohm |
LPF / HPF | 80Hz ~ 3kHz / Full ~ 3kHz |
THD @ RMS Power | <0.05% |
S/N (EIA Rated) | >105 dB |
Max Voltage | 14.5v |
RCA Voltage | 200mV ~ 10V |
Freq. Response | 14Hz - 50kHz |
Crossover Slope | 12dB Rear Channel |
Subsonic Filter | N/A |
Bass EQ | OFF / 6dB / 12dB |
Subwoofer EQ | N/A |
Dimensions Inches | 12.56 (in) x 2.0 (in) x 7.1 (in) |
Dimensions mm | 319mm x 54mm x 171mm |