R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier
R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier

R5 | 2000 Watts RMS / 4000w MAX - 1Ω Stable Monoblock Car Amplifier

Regular price $400.00 Sale price $199.99 Save $200.01

TO FIND OUT WHEN THIS OR OTHER PRODUCTS WILL BE BACK - SIGN UP FOR THE TORO TECH NEWSLETTER FOR PRODUCT "BACK IN STOCK" UPDATES!

Looking to get noticed, you need look no further. Just one glance and you know these TORO Rage amplifiers mean business. Don’t be fooled by their understated elegance, just listen to the musicality that’s missing from other Amplifiers in their category and then look at the attention to detail that belies it’s price point
As we’ve all learned, “A system is only as good as it’s weakest link,” 
 

In a competition system this becomes more critical. TORO Tech presents the ultimate low frequency solution for both competitors and audiophiles alike. Our Rage series Mono Block Amplifiers feature a MOSFET power supply to insure an inexhaustible stream of voltage under all conditions. These Mono Block Amplifiers utilize a Class D design enabling high efficiency and cool running under typical conditions. With competitors in mind we have designed the R5 to remain stable with as little as 1 Ohm loads.

The R5 features variable low pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as nickle plated terminal blocks for power input & speaker output. 

Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R5 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R5 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

What does all this translate to? Simply, amplifiers you can count on for rigorous competition and yet flexible and affordable enough to use as any system anchor.

FEATURES:

  • Sound Quality Class-D Design
  • Built-In Auto Sensing Turn-On Function (Hi-Inputs)
  • MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
  • Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
  • Variable Low Pass Electronic Crossover
  • Selectable Bass Boost EQ ~ 0 ~ 12dB
  • Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
  • Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
  • Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
  • 1Ω Stable Operation with Extensive Output Power Increase
  • Variable Gain Control
  • Remote Level Control Port (for optional controller)

SPECIFICATIONS:

RMS Power @ 1 Ohm 2000w x 1
PEAK Power 4000w x 1
RMS @ 2 Ohms 1200w x 1
RMS @ 4 Ohms 600w x 1
Bridged RMS N/A
Min Impedance 1 Ohm
LPF / HPF 60Hz ~ 220Hz
THD @ RMS Power <1% 
S/N (EIA Rated) >100 dB
Max Voltage 14.5v
RCA Voltage 200mV  ~ 10V
Freq. Response 13Hz - 220Hz
Crossover Slope 12dB
Subsonic Filter 0Hz ~ 60Hz
Bass EQ  0Hz ~ 12dB
Subwoofer EQ 30Hz ~ 120Hz 
Dimensions Inches 13.98 (in) x 2.0 (in) x 7.1 (in)
Dimensions mm 355mm x 54mm x 171mm 

 


    Customer Reviews

    Based on 3 reviews Write a review

    You may also like