Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS
Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS

Two FIERCE62 SUBS + R3 MONO AMPLIFIER @ 2Ω | 400 Watts RMS

Regular price Price: $363.35 Sale price
SALE: $279.98

19 in stock
Two Fierce 62 Subwoofers (400 Watts RMS) + One R3 Micro Monoblock Amplifier (400 Watts RMS @ 2 Ohm)
At TORO TECH being Fierce is in our DNA, it starts with a Fierce desire to Excel. The Fierce series of Low-Frequency Subs is the result of selecting the right components to create a series of Subs that are value-priced but competition-ready. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE62 has Dual 1.5" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets, and 100% Pure Copper Wire directly hard-wired into the subwoofer leads. 

The R3 features variable low-pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany-style RCA jacks as well as Nickle-plated terminal blocks for power input & speaker output. 

With a high-quality Class D PCB layout that includes a built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn-on/off circuit that eliminates pops and clicks.

The R3 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control and remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R3 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

  • Heavy-Duty Textured Cast Basket
  • Reinforced Non-Pressed Paper Cone 
  • EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
  • 1.5" / 38.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
  • Double Stacked 70oz High Energy Magnets 
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Customized Rubber Gasket / Magnet Boot
  • 10 Gauge Oxygen Free, Pure Copper Wire 
  • Dual Black Poly Cotton Spiders with Mirror Image Layout
Size 6.5"
Peak Watts 400w  (Short Bursts) 
RMS Watts 200w  (Daily Driver) 
Freq. Response 20Hz ~ 250Hz
Displacement 0.03 cu. ft.
Fs- F.A.R. 57Hz 
Qts 0.53
Vas 0.09 ct. Ft. 
X-Max (2-Way) 18mm
SPL 82dB
Voice Coil 1.5" Copper Dual 2 Ohm
Terminals 10 Gauge 100% Copper Direct Input Cables  
Basket Die Cast Aluminum 
Tinsel Leads Heavy Duty Double
Enclosure Details Click on Enclosure Info Tab below
Total Weight 11 Pounds


  • Sound Quality Class-D Design
  • Built-In Auto Sensing Turn-On Function (Hi-Inputs)
  • MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
  • Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
  • Variable Low Pass Electronic Crossover
  • Selectable Bass Boost EQ ~ 0 ~ 12dB
  • Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
  • Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
  • Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
  • 1Ω Stable Operation with Extensive Output Power Increase
  • Variable Gain Control
  • 4 AWG Power and Ground Terminals
  • Remote Level Control Port (for optional controller)

RMS Power @ 1 Ohm 550w x 1
PEAK Power 1500w x 1
RMS @ 2 Ohms 380w x 1
RMS @ 4 Ohms 200w x 1
Bridged RMS N/A
Min Impedance 1 Ohm
LPF / HPF 60Hz ~ 220Hz
THD @ RMS Power <0.8% 
S/N (EIA Rated) >100 dB
Max Voltage 14.5v
RCA Voltage 200mV  ~ 10V
Freq. Response 13Hz - 220Hz
Crossover Slope 12dB
Subsonic Filter 0Hz ~ 60Hz
Bass EQ  0dB ~ 12dB
Subwoofer EQ 30Hz ~ 120Hz 
Dimensions Inches 7.68 (in) x 2.0 (in) x 7.1 (in)
Dimensions mm 195mm x 54mm x 171mm 

You may also like