Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS
Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS

Two FIERCE82 SUBS + R4 MONO AMPLIFIER @ 2Ω | 800 Watts RMS

Regular price Price: $520.00 Sale price
SALE: $339.98
Sale ends in

Two Fierce 82 Subwoofers (800 Watts RMS) + One R4 Micro Monoblock Amplifier (1050 Watts RMS)

The FIERCE 82 can take up to 400 Watts RMS each and has 2" Inch Dual 2 Ohm Voice Coils that combined can be wired for a 2-ohm final load. The Fierce line-up is a result of our Design & Engineering team’s desire and our corporate willingness to give them a “green light” to create a Sub that’s happy whether it’s working or playing - Mission Accomplished! Belying their value-added pricing these Subs are true competitors in every aspect. The FIERCE 82 has Dual 2" Voice Coils, Ribbed Foam Surrounds, Double Stacked Strontium Ferrite Magnets, Cast Aluminum Baskets and 100% Pure Copper Wire directly hard-wired into the subwoofers leads

The R4 features variable low-pass crossovers for system flexibility. To eliminate any possible weak link we’ve spared no expense in offering the best possible connections with Tiffany style RCA jacks for as well as Nickle-plated terminal blocks for power input & speaker output. 

Stable at 1 Ohm with a high quality Class D PCB layout that includes built in auto sensing turn on function for vehicles that do not have the ability for RCA output, selective Bass Boost EQ for fine tuning, soft delay remote turn on/off circuit that eliminates pops and clicks.

The R4 Amplifier utilizes a MOSFET power supply for high output and increased stability, variable gain control, and a remote level control port for optional controller. With dynamic features like its Parametric EQ with Q-Control and Built-In Auto Sensing Turn-On the Rage R4 Amplifier blends power and performance with sleek design allowing you to Rage in style. 

  • Heavy Duty Textured Cast Aluminum Basket
  • Reinforced Non-Pressed Paper Cone 
  • EROM Hi-Tech Ribbed Foam Surround for Strength & Flexibility
  • 2" / 50.8mm 4-Layer Hi-Temperature Voice Coil for Extended Playing 
  • Double Stacked 90oz High Energy Magnets 
  • Enhanced Cooling T-yoke Design with Black Anodized Finish
  • Customized Rubber Gasket / Magnet Boot
  • 10 Gauge Oxygen Free, Pure Copper Wire 
  • Triple Black Poly Cotton Spiders with Mirror Image Layout
Size 8"
Peak Watts 800w  (Short Bursts) 
RMS Watts 400w  (Daily Driver) 
Freq. Response 20Hz ~ 250Hz
Displacement 0.04 cu. ft.
Fs- F.A.R. 54Hz 
Qts 0.47
Vas 0.09 ct. Ft. 
X-Max (2-Way) 20mm
SPL 84dB
Voice Coil 2" Dual 2 Ohm
Terminals 10 Gauge 100% Copper Direct Input Cables  
Basket Die Cast Aluminum 
Tinsel Leads Heavy Duty Double
Ported Box 1.13ft3 Internal (Port Area 16.59 in2) 
Total Weight 15 Pounds

 

  • Sound Quality Class-D Design
  • Built-In Auto Sensing Turn-On Function (Hi-Inputs)
  • MOSFET Power Supplies for High Power Output and Best Stability into Low Impedance Loads
  • Soft Delay Remote Turn On/Off Circuit Eliminates Pops and Clicks
  • Variable Low Pass Electronic Crossover
  • Selectable Bass Boost EQ ~ 0 ~ 12dB
  • Q-Control for Narrow to Wide Parametric EQ Frequency Adjustments
  • Subsonic Filter Control to Filter Out Unwanted Low Frequencies 0Hz ~ 60Hz
  • Self-Diagnostic Protection Circuit with LED Status Indicator for Impedance Over-load, Speaker Short Circuit, Thermal Overheating, and DC Output
  • 1Ω Stable Operation with Extensive Output Power Increase
  • Variable Gain Control
  • 4 AWG Power and Ground Terminals
  • Remote Level Control Port (for optional controller)

 

RMS Power @ 1 Ohm 1050w x 1
PEAK Power 2500w x 1
RMS @ 2 Ohms 700w x 1
RMS @ 4 Ohms 400w x 1
Bridged RMS N/A
Min Impedance 1 Ohm
LPF / HPF 60Hz ~ 220Hz
THD @ RMS Power <1% 
S/N (EIA Rated) >100 dB
Max Voltage 14.5v
RCA Voltage 200mV  ~ 10V
Freq. Response 13Hz - 220Hz
Crossover Slope 12dB
Subsonic Filter 0Hz ~ 60Hz
Bass EQ  0dB ~ 12dB
Subwoofer EQ 30Hz ~ 120Hz 
Dimensions Inches 10.83 (in) x 2.0 (in) x 7.1 (in)
Dimensions mm 275mm x 54mm x 171mm 

You may also like